Fixture Name:
Firmware Version:
DMX/RDM Test
- Factory Default to ensure fixture is in default settings
- Open Vision Control App and go into Test Mode
- Use a RDM test tool or our Vision DMX Adapter for testing
RDM
| Function | Sub Function | Passed | Comment |
|---|---|---|---|
| Test Get Device Info | Overall Look | ||
| Test Device Label | Set Get | ||
| Test Factory Defaults | Set Get | ||
| Test DMX Personality | Set Get | ||
| Test DMX Startaddress | Set Get | ||
| Test Sensor Definiton | Get | ||
| Test Sensor Value | Get | ||
| Test Lamp Hours | Get | ||
| Test PowerCycles | Get | ||
| Test Identify | Set Get | ||
| Test Reset | Set | ||
| Power State | Set Get | ||
| Perform Selftest | Set Get | ||
| Selftest Description | Get |
Custom RDM
| Function | Sub Function | Passed | Comment |
|---|---|---|---|
| Test GET CPID VISION | Overall Look | ||
| Test Powerstate | |||
| Change DMX Address using Display, RDM | |||
| Change DMX Personality using Display, RDM | |||
| Change Input Source to iQ.Mesh via Display | |||
| Test Set CPID VISION | Set Input Source | ||
| Set Input State. Therefore link the fixture in the app and unlink via Set CPID IQ Unlink | |||
| Set Emergency Mode (if it is a battery fixture) | |||
| Set Battery Runtime (if it is a battery fixture) | |||
| Set Antitheft Mode (if supported) | |||
| Test CPID Error Codes | Get | ||
| Test CPID Warning Codes | Get |
VISION Test
- Factory Default to ensure fixture is in default settings
- Open Vision Control App and go into Test Mode
- Set Fixture to VISION
RDM
| Function | Sub Function | Passed | Comment |
|---|---|---|---|
| Test Get Device Info | Overall Look | ||
| Test Device Label | Set Get | ||
| Test Factory Defaults | Set Get | ||
| Test DMX Personality | Set Get | ||
| Test DMX Startaddress | Set Get | ||
| Test Sensor Definiton | Get | ||
| Test Sensor Value | Get | ||
| Test Lamp Hours | Get | ||
| Test PowerCycles | Get | ||
| Test Identify | Set Get | ||
| Test Reset | Set | ||
| Power State | Set Get | ||
| Perform Selftest | Set Get | ||
| Selftest Description | Get |
Custom RDM
| Function | Sub Function | Passed | Comment |
|---|---|---|---|
| Test GET CPID VISION (IQ) | Overall Look | ||
| Change DMX Address using Display, RDM, IQ.Mesh | |||
| Change DMX Personality using Display, RDM | |||
| Change Input Source to iQ.Mesh via Display | |||
| Test Set CPID VISION | Set Input Source | ||
| Set Input State. Therefore link the fixture in the app and unlink via Set CPID IQ Unlink | |||
| Set Emergency Mode (if it is a battery fixture) | |||
| Set Battery Runtime (if it is a battery fixture) | |||
| Set Antitheft Mode (if supported) | |||
| Test CPID Error Codes | Get | ||
| Test CPID Warning Codes | Get |
Firmware Update
| Function | Passed | Comment |
|---|---|---|
| Test Firmware Update |
DMX Control
| Function | Subfunction | Passed | Comment |
|---|---|---|---|
| Test DMX Control using iQ.Personality == 0 | Dmx Startadress == 1 | ||
| DMX Startaddress == 10 | |||
| Test DMX Control using iQ.Personality == 1 | Dmx Startadress == 1 | ||
| DMX Startaddress == 10 | |||
| Test DMX Control using iQ.Personality == 255 | Dmx Startadress == 1 | ||
| DMX Startaddress == 10 |
Display Menu Test
| Function | Passed | Comment |
|---|---|---|
| Test Input Source iQ.Mesh | ||
| Test Unlink iQ.Mesh | ||
| Test iQ.Service Connect |
NFC Test
| Function | Passed | Comment |
|---|---|---|
| Test NFC Antenna behavior | ||
| Test WakeUp through NFC | ||
| Test RDM commands through NFC |
Creative Config Test
| Function | Passed | Comment |
|---|---|---|
| Test Creative Config | ||
| Test Shutter performance | ||
| Test Color Behavior |
Optional Tests
Button Test
| Function | Passed | Comment |
|---|---|---|
| Test Button (On/Off/Unlink) |
Battery Test
| Function | Passed | Comment |
|---|---|---|
| Test Battery |
Motion Test
| Function | Passed | Comment |
|---|---|---|
| Test Motion |
IR Test
| Function | Passed | Comment |
|---|---|---|
| Test IR |